The use of metal roof has been the number one choice for home roofing material because of its light yet sturdy construction. Aside from the fact that metal roof is cheap it is also easy to install and does not require much man power to build a house with metal roof. A metal roof is typically made of thin sheets of galvanized steel that is placed overlapping each other. Overtime metal roof wear out because of environmental factors. However, with proper roof maintenance, you can slow down the wearing out of metal roof. Proper metal roof maintenance is essential because this would save you much money. Although some metal roof are already coated with Galvalume that do not need maintenance related to wearing down. However, metal roof owners must still do monthly metal roof maintenance check for leaks, dent and tears that can affect the integrity of the metal roof. Let us take a closer look on the different metal roof maintenance to prolong the life of your metal roof. Here are some helpful tips that you can do to check your roof’s condition and maintain its integrity.

Types of metal roof

Metal roof are made of steel, tin, copper, and aluminum which has special maintenance instruction to prolong its life. Here are some of the basic ways to maintain metal roof made out of these materials. However, the most effective way to maintain the integrity of a metal roof is to keep it clean as much as possible. Keeping it free from dirt and bird droppings would ensure that your roof would last. Proper cleaning would prevent the build-up of algae, mold and mild dew.

Taking care of metal roof

Applying these simple metal roof maintenance tips will ensure you that your roof can last up to 40 years.
1. Metals react with each other. In using metal roof, make sure that you use the same metal composition. In this way, metal to metal chemical reaction would be avoided which can lead to corrosion and decrease your metal roof life span.
2. Keep painted side up to keep rust from penetrating the painted part. Use paint that has anti rust protection to keep your metal roof rust free.
3. When you detect holes or uneven metal roof placement, repair them right away.
4. Use water proof water sealer or solder to seal small holes on the metal roof.
5. When using nails or screw to secure, take into consideration the type of metal composition of the nail or screw. Use screw or nail with the same metal composition of your metal roof.
6. When using washers to secure the roof, make sure that you place the washer on top of the screw and not below because water can accumulate on the washer and would lead to leakage and corrosion.
7. Additional reminders, depending on the type of roof, use non corrosive resin flux for metal roof made of steel and acid flux for metal roof made of copper. And always take note that aluminum cannot be soldered.

If you want to save money and never pay a worker to install your home’s metal roof, there are easy to follow roof application that you can do it yourself. A metal roof is the most widely used roofing material today. it is made from corrugated galvanized steel and it gained its popularity in the early times. Up this time, a metal roof is still the preferred roofing material because of is ample advantages. It is lightweight, portable, cheap, durable and easy to install. It can also withstand harsh winds, hails, fires, and snow. A metal roof is also eco-friendly because it can be readily recycled since some metal roof has specs of aluminum and copper with it. It is labor efficient and the owner can install it without the need of calling professional carpenters. However, there are also some downsides of a metal roof such as. Care must be done like painting it with antirust coating to prevent corrosion. A metal roof also expands during the hot season which makes annoying noise from the movement caused by the heat, lastly, once a metal roof gets corroded, it can be dangerous to step on since it can be fragile and sharp. However, when proper safety guidelines are followed carefully, using a metal roof can be very economical for home owners.

Installing metal roof

When planning to apply your own metal roof, it is better to read on some basic installation procedure to avoid incorrect roof application. Having the right tool can also be beneficial. To begin with, since the material used in a metal roof is versatile and durable, it is flexible enough to be used on residential, commercial, industrial and other buildings. A metal roof can also be used as an effective siding. In the modern times, there are many different roof design and style that fit almost every building. In the installation of a metal roof, these simple steps will guide you in the application of a metal roof.

1.     For the first step, make sure that all roof panels are installed square and all the other metal roof panels will follow.

2.     Pre drilling metal roof is important for easy installation. You can pre drill a stack of ten metal roofs at a time and making sure that it has the right drill distance.

3.     Once drilling is done, make sure the roof brace is sturdy enough to carry your weight and the metal roof’s weight.

4.     Start layering each metal roof starting at the bottom part making sure that you overlap each metal roof.

5.     Screw each roof but not too tight. The best way to do this is to adjust your drill tension. Preferably testing it on a metal scrap.

6.     To prevent leaks, using a roof glue can seal of drilled areas.

7.     After installing all the metal roofs. Make sure to brush all metal fillings or metal shavings from the metal roof since this can cause rust spots on the roof when they are left there.